How To Fix PS4 Database Corrupted?

How To Fix PS4 Database Corrupted?

1. Repair the corrupted PS4 database

The PS4 database is an organized collection of data about your device. When accessing, editing, or updating data, this is done through the interaction between the company and the database. Therefore, if the PS4 database gets corrupted, it can be very annoying. PS4 Database

Corrupt database symptom:

PS4 warns that the database is corrupted and reboots automatically.

The game takes a long time to load and is unusually slow.

PS4 cannot read the disc.

Menu navigation is slow.

It breaks during the performance.

Database Corruption Cause:

Underlying Platform Corruption

File Header Corruption

Storage Media Corruption

Power Failure

Hardware Failure

Of course, there are other potential causes, not to mention all here. I have. Once you understand the symptoms and causes, understand the troubleshooting steps for the problem. PS4 Database

Fix PS4 Corrupted Database

Unlike PS4 which does not turn on, booting the device with a corrupted database error will provide further solutions. Proven by many users, the most effective way to repair a damaged PS4 database is to recreate it. That is, rebuilding the database scans the drive and creates a new database with all its contents.

The Rebuild Database option is available in safe mode. Therefore, you need to turn off the device and boot into safe mode. The detailed steps are as follows:

Step 1. Turn off the console and wait for the white light to dim completely.

Step 2. Press and hold the power button on the console until you hear two beeps. After that, PS4 will boot in safe mode.

Step 3. Connect the PS4 controller to the console with a USB cable.

Step 4. There are several options available in safe mode. Select Rebuild Database and wait for the process to complete. However, rebuilding the database does not repair the database that was corrupted due to a hardware failure (such as a hard drive) or a system failure. In such cases, there are two viable solutions.

Repairing a Damaged Hard Drive

PS4 Initialization

To repair the PS4’s internal hard drive, you must first carefully remove it. However, if you initialize the device (this option is available in safe mode), you should be aware that initialization resets the system settings to defaults and erases the data stored in system memory. Therefore, be careful when making decisions.

2. Repair corrupted PS4 data

Unlike a corrupted database, corrupted data is always related to a particular game, not a PS4 database.

PS4 Data Corruption Symptoms:

PS4 game is delayed, game screen goes black, or characters cannot be loaded

Error message: “The application is no longer available. The following application has corrupted data. Remove the application from PS4 and reinsert the disk. ”

Error Message:” The corrupted data is corrupted and cannot be read. There are obvious signs.

Fix 1. Manually delete corrupted data The most common reason for getting the error message is that some files in the game are corrupted. Removing them is the easiest way to solve the problem.

Step 1. Go to Settings> System Storage Management> Saved Data> Media Player.

Step 2. Navigate to the Media Player folder. Saved files containing corrupted data are displayed.

Step 3. Press the “Options” button to delete the saved corrupted data file.

Step 4. Get off now. Open the Media Player app again.

Fix 2. Download and delete the corrupted PS4 file and re-download

The downloaded file was not properly installed on your system. The data may have been corrupted during the download process.

Step 1. Delete the downloaded file. On PS4, go to Notifications> Downloads and select your content.

Step 2. Then press the “Options” button on your controller to delete the downloaded content.

Step 3. Retry the file download.

Fix 3. Rebuild PS4 Database to Repair Corrupted Data

As explained in Part 1, rebuilding the database will optimize PS4 and solve many PS4 issues to repair corrupted data. I can do it.

Step 1. Connect the PS4 controller to the console with a USB cable.

Step 2. Press and hold the power button on the PS4 console until you hear the second beep.

Step 3. Then release the button. PS4 is in safe mode. Step 4. Select “5. Rebuild Database” on the controller.

Wait for the process to finish. Then turn on your PS4 and see if database restore helps repair the damaged PS4. If the error persists, consider initializing and disabling PS4.

Read more

Leave a Reply

To leave a comment, please Login or Register

Comments (0)