How to Spot Counterfeit Plywood: Tips from Austin Ply Experts

Written by Saranya samanta  »  Updated on: November 19th, 2024

With the increasing complexity of the market environment in the current society, the problem of fake products is becoming increasingly serious; for the plywood industry, this issue can hardly be ignored. Plywood is actually an important material and in case it’s replaced by a counterfeit one, severe problems arising to the building’s structure and huge losses are inevitable. This is why at Austin Plywood our focus is to assist you in making a right choice in your purchase to get the best plywood. Below, our plywood experts have laid down information to assist you in the detection of fake plywood as well as how to fully protect yourself.

This paper seeks to establish the risks associated with counterfeit plywood so as to avoid them at all costs.

Unfortunately, the imitations of genuine products does not have the same kind of sturdiness as the originals, and plywood is not an exemption. Innocent as it may sound, it could lead to poor safety, shorten the durability of your constructions and escalate costs through replacement and repairs. Realizing the fact developing counterfeit plywood is a way of harming your investment as well as keeping standards and safety in your work, this passes the message.

Main Parameters of Counterfeit Plywood 

  •  1. Unusual Weight and Density

 While the real plywood has weight and density that is unique for every grade and type of this material. Such substandard products as counterfeit plywood can have the following characteristics. One should also check the weight of the plywood; whether it feels very light or very heavy then it is possible that it is fake.

  •  2. Surface Finish and Texture

 Premium quality plywood will normally have a fairly plain surface, very little bumps and knots and also will have width that is consistent. Fake plyboard or plywood may not be smooth, there could be signs of cracking or rough surfaces. One should always check the surface of the fin, so that it is smooth and of identical thickness on all sides.

  •  3. Stamping and Labeling

 This suggestion is meant to encourage actual furniture grade plywood that comes from compounding manufacturers such as Austin Plywood that has to be stamped and labeled. This visual information must feature clear and accurate signs that point out the manufacturer’s name, the grade, the thickness and the certification on the plate’s surface. Pirated products usually are not well marked or are even misleading in terms of brand and model.

  •  4. Core Gaps and Overlaps

 Flatten the edges of the sheets of plywood that you’re staring to make sure that none of them have any core gaps or core overlaps. Plywood with closely packed cores is real while that with obviously visible or uneven core is usually fake. This structural defect may greatly impact on the strength and the sturdiness of plywood being produced.

  •  5. Pricing

 Thus, while running into a low price might be appealing, it may often be a sign that the plywood in question might be fake. Real plywood is provided at an average of the prices that correspond to the quality and satisfy the cost of its manufacturing. Free products as well as products sold at extremely low prices can also be considered to be fake.

  •  6. Supplier Reputation

Fresh and good quality plywood should always be bought from those authorized dealers and suppliers. The company has several distributors through which it supplies your necessities and all the products you get from Austin Plywood are authentic. Also, check the rating and other reviews that are posted by other people who have worked with the supplier before.

Detailed Inspection Techniques

  •  1. Visual Inspection

 Originally perform external assessment on the object. As for the surface finish, labelling of the foam, and the gaps in the core all should be evaluated for the signs listed above. Especially if you bought some sheets of plywood and you are going to use them for building your project, do not overlook the edges and the corners of the plywood sheets.

  •  2. Measurement Verification

 Assume you need to make a cut on the sheet from one side of the plane to another, measure the thickness of the plywood with the help of a caliper. Real plywood should not be covered in a uniform thickness on top all through the sheet. It is very possible that any variation in thickness more than a certain threshold could be a sign of a fake item.

  •  3. Bend Test

 Carry out a bend test to determine the ability of the plywood as well as its strength. A genuine plywood should give a little when pressed but should not have a cracking sound or split apart. Imitating plywood can easily chip off or split because of poor material that has been used to make the product.

  •  4. Moisture Content Test

 The best plywood for kitchen should be properly seasoned in order to avoid cases of warping and other effects of moisture content. Get a moisture meter and test the moisture content on the plywood on the side facing the wall. Consequently, fake plywood will always exhibit relatively high moisture content, and thus problems in the long run.

 Why Choose Austin Plywood?

 At Austin Plywood, we ensure that our customers get nothing but the best-quality actual plywood. All our plywood is well tested and inspected to meet standard set in the market to provide our customers with best products. When you decide to work with Austin Plywood, you are being assured of quality and that teaches of reliability and durability.

 Our Commitment to Quality

 Thus, we acknowledge the problems that fake plywood pose to the consumers and the market. This is why we care about giving you the tools and the information so you can make the right choices. Whereas our team of experts is always ready to give you advice and/or assist you when making the purchase.

Conclusion

It is not always easy to distinguish between original plywood and a counterfeit one since it entails one to be always alert and informed. In this article, the best practices as recommended by Austin Plywood specialists have been provided to help you keep your investment safe and your projects free from various risks. When considering plywood, the old adage ‘you get what you pay for’ can be very beneficial to heed; especially for avoid the problem of forging plywood.

 Do not forget and whenever there is something which you are not very certain of, you can always seek the services of Austin Plywood specialists. Plywood market is full of complications and traps, worry not, we are here to guide you through and provide you with the best suitable products.

For more details or any help, you can always visit our website or talk to our customer care executives. In this way, a future cleansed of fake plywood and populated by genuine and trustworthy products can be made real.



Disclaimer:

We do not claim ownership of any content, links or images featured on this post unless explicitly stated. If you believe any content or images infringes on your copyright, please contact us immediately for removal ([email protected]). Please note that content published under our account may be sponsored or contributed by guest authors. We assume no responsibility for the accuracy or originality of such content. We hold no responsibilty of content and images published as ours is a publishers platform. Mail us for any query and we will remove that content/image immediately.