Macard WiFi Extender Not Working? Try This Step

It's likely that your Macard WiFi Extender isn't doing what it's meant to do, which is to make your WiFi stronger. It's possible that you plugged it in, set it up, and got it to work once. But now nothing. Not a signal. Not online. Nothing but blinking lights and anger.

Slow down before you throw it away or blame your internet provider. Let's go over a few things. There will be no filler or guessing here. Just real, tried-and-true steps to get your extender back on track.

Step One: Check If it’s Actually Connected to Your Router

First things first: don’t assume the extender is still connected. These things drop out more often than they should, If you’ve landed here, chances are your Macard WiFi Extender isn’t doing what it’s supposed to extend your WiFi. Maybe you plugged it in, followed the setup, got it working once and now nothing. No signal. No internet. Just blinking lights and frustration.

Before you toss it or blame your internet provider, slow down. Let’s walk through a few things together. This isn’t going to be fluff or guesswork just real, tested steps to get your extender back on track.

Especially after a power outage or router reboot.

Plug the Macard extender in.

Wait for the power light to go solid.

Check the router signal LED, if that light’s red or off, it’s not connected to your router.

Now, if you can, get close to your router. Like same room. Plug in the extender there and try again. If it connects when it’s near the router, your issue is weak signal or interference—not a faulty extender.

Step Two: Log In to the Setup Page

If you’ve got power but still no internet, we need to access the setup interface. Open a browser on your phone or laptop that’s connected to the extender’s WiFi (you’ll usually see something like Macard_EXT as the network name).

Then in the browser, type: 192.168.10.1

That should take you to the Macard extender’s setup page. If it doesn’t load:

Make sure you’re not connected to your main WiFi or using mobile data.

Try a different browser. Chrome sometimes gets stuck.

Clear cache if needed.

Reset the extender (we’ll get to that in a second).

Once you're on the setup page, log in (usually it's "admin" for both username and password unless you changed it). From here, you should see whether it’s connected to your main router or just floating solo.

Step Three: Reconnect It Manually

If your Macard WiFi Extender isn’t working even after login, try reconnecting it manually.

Here’s the quick version:

1. Forget any previous setup – if you changed your main router’s password recently, the extender doesn’t know that.

2. On the setup page, choose your main WiFi network from the list.

3. Enter your WiFi password again.

4. Save and let it reboot.

Once it restarts, connect to the extended network—it usually ends in _EXT.

Test internet. If it works, great. If not, move to the next step.

Step Four: Reset the Extender (Hard Reset)

Okay, if nothing has worked so far and the Macard WiFi Extender is still not working, time for a full reset.

Look for the tiny reset button on the extender. Usually, you’ll need a paperclip or SIM tool.

Hold it down for 10-15 seconds until all the lights blink off and on.

Wait for it to reboot.

This puts the extender back in factory mode. Now, go back to step one and go through setup like it’s brand new.

Pro tip: Do the reset near your router. Get it fully working there before moving it farther away.

Step Five: Placement Actually Matters

People think WiFi extenders are magic boxes. They’re not. They just repeat your existing signal. So if you place it in a dead zone—where your WiFi doesn’t even reach—what exactly is it supposed to repeat?

Here’s the sweet spot: plug the Macard extender midway between your router and the area where your signal drops. And try to avoid thick walls, microwaves, or metal objects. Those things mess with signals more than you’d think.

Still No Luck? A Few Final Things to Check

If your Macard WiFi Extender not working till now after all of this, here’s a checklist:

Firmware updates – Some Macard models allow updates. Check the setup page.

Power cycles – Restart your main router and extender after setup.

Different device testing – Sometimes one device connects while another won’t. Test on your phone, laptop, etc.

Use a wired connection – If the extender has an Ethernet port, try connecting your laptop directly to it to see if it’s passing internet.

Read Also:- How to Use Macard N300 Extender as a Wireless Access Point?

Final Thoughts

Tech breaks. Extenders glitch. Doesn’t always mean they’re bad devices—it just means they need a little hand-holding sometimes. If you’re Macard WiFi Extender not working, don’t panic. Run through these steps. Be methodical. Half the time, it’s just a missed setting or weak signal area.

Worst-case scenario? Reset and start over. It’s annoying, but it works.

And if you do get it working again, write down your login info. Save it in your phone. You’ll thank yourself next time.