Simplified Wavlink Router Setup

Looking for a simple yet quick Wavlink Router Setup method but couldn't find one? If yes, then this guide will be your ultimate savior. In this guide, we'll not provide you with just one Wavlink router setup method but in total two methods. So the user can easily pick up one as per their convenience. Additionally, we'll also be sharing some tips through which you can maximize the performance of your Wavlink router. So without wasting any further time, let's begin quickly.

Wavlink Router Setup Instructions!

Collect The Necessary Components

Firstly, let's check out what all you need for the quick setup. Starting off with the most important component which is the Wavlink Router. Next you need a power adapter, an Ethernet cable, a modem with an active internet plan. Most importantly a quick user manual as it contains important information like default IP address, default login details and troubleshooting methods as well. Lastly, you need a smart gadget like a smartphone, PC, laptop or you can also pick up your ipad for the Wavlink router setup. Additionally, a properly working power outlet nearby the existing modem is also an essential requirement.

Consider Expert Help For Setup

In case you are hesitant to do the setup on your own, then take the expert help. Because instead of causing damage to the router by doing incorrect setup, it's better to outsource the help.

Reset For A Fresh Setup

Further, if any user has already tried to perform the Wavlink router setup, but couldn't complete it successfully, then the reset action is a must. As a factory reset brings the router to its original condition. To reset the Wavlink router few steps are there:

1. Firstly, make sure the Wavlink router is in working mode.
2. Now fetch a paper clip or an object similar to it.
3. Moving forward carefully insert this pin in the reset hole of the router.
4. Thereafter, push and hold the reset button for not less that 6 to 8 seconds or until the power LED goes to sleep.
5. Finally, as you release the reset is complete.

Now the Wavlink router is all set for the fresh setup.

Strategic Placement Is Crucial!

To get the best out of your Wavlink Router Setup, correct placement of the Wavlink router is extremely important. Here are some recommendations that'll help you with the same:

✓ Place the Wavlink router in the central area of your place, be it office space or your home. The reason behind placing the router in a central area is that this way the router can transmit its signals in all the directions of your place equally.

✓ Next, never ever place the router inside a closed box, behind furniture set or in between thick walls. This can restrict the signals from travelling to their destination which is your device.

✓ Moving further, keeping the electronic and metal objects nearby the Wavlink router can be a huge mistake. Common objects are microwave, bluetooth devices, fish tanks, refrigerator, cordless phones and security cameras. These objects can interfere with the router's signals.

✓ Placing the Wavlink router on a high shelf or on a table top or directly mounting it on the wall is a great idea. As routers work magically on higher surfaces.

Installation Guide

Wavlink Router Setup steps are extremely easy to perform. To begin with first, connect the hardware.

Hardware Connection

Place the Wavlink router near to your existing modem. After that fetch the ethernet cable. Link its one end to the Wavlink router's WAN port. Slip in the other end into the modem's LAN port. Moving forward, fetch the power adapter. Slip its power pin into the power port of your Wavlink. Now plug in the adaptor to a vacant power outlet. Switch it on. Also make sure the host modem is on. Let the entire Wavlink Router Setup power up.

Connect To The Router's Network

Now, pick up your smart gadget. Toggle its wifi by visiting the Wi-Fi settings of your device. A complete list of available wifi networks appears. Pick the preassigned network name of your Wavlink router and connect.

Complete The Setup

For completing the Wavlink Router Setup there are two methods.

Method 1: Using Wavlink App

• On your networked device get the Wavlink app. Using an android device? Get the app from Google Play Store. An iOs user? Grab the application from App Store.
• After that open the application, and simply follow the directions as it pops on your screen. As you fulfill the commands, the setup completes.

Method 2: Using Web Browser

• On your connected device, open any internet browser. Move to the URL bar.
• After that type in 192.168.10.1. Hit enter key. A page pops up.
• Further, fill the password. It's admin by default. Thereafter select the language and move forward.
• Now select the WAN type and complete the installation by following the on-screen prompts.

Lastly, test the connection. For this pick your smart gadget. Connect to the wifi by using the same password that you set during the configuration. Move around different areas of your home or office and check the speed and range. For any assistance, issues and queries feel free to connect with the experts.