How to Set up Canon PIXMA Printer: A Simple Guide

It's not as hard as it looks to set up a Canon PIXMA printer. This guide will help you set up your printer step by step, whether it's for the first time or you're doing it again. After following the right steps, you can print, scan, or copy in no time.

We'll talk about how to Unbox, connect, and set up your Canon PIXMA printer using USB or WiFi in this post. It will also be covered how to set up drivers and apps.
Steps to Setup Canon PIXMA Printer

Step 1: Unbox and Prepare Your Printer

Start by unboxing your Canon PIXMA printer. Make sure all items are included in the box:
Canon PIXMA printer
Power cord
Ink cartridges
Setup CD or user manual (optional)
USB cable (for wired setup – not included with all models)
Follow these steps:
Take off all of the printer's plastic and wrapping from the outside and the inside.
Open the door that lets you get to the ink cartridges and remove any tape or cardboard that is covering them.
Connect the power cord to both the printer and the wall.
To turn on the printer, press the Power button.

Step -2 Install ink cartridges 

The printer is powered on; now it's time to put in the ink.
Wait until the holder of the cartridge slides to the middle.
Take off the protective tape and unpack the ink cartridges.
Place the cartridges in the appropriate slots—black and color.
Gently press down until they click into position.
Shut the door to the cartridge access.
The printer might go through a brief setup procedure. Move on only after it is finished.

Step 3: Put paper in the tray 

Your printer has to print the test page during setup on paper.
Remove the back paper feed or pull out the paper tray.
Change the paper size to fit your paper (often A4 or letter).
Stack plain white paper.
Set the guidelines such that the paper sits securely but not too tight.

Step 4 Select Connection Method

The printer configuration can be finished in two ways:

A: Wireless Setup (WiFi)
Most Canon PIXMA printers support WiFi, letting you print wirelessly from your tablet, phone, or computer.

Method 1: Using the Control Panel of the Printer

Choose the WiFi or Wireless Setup option on the printer.
Choose Wireless LAN Configuration.
The printer will search for active networks.
Select your WiFi network name (SSID).
Type your WiFi password using the printer's touch screen or keypad.
Let the printer connect. You will either receive a confirmation message or a WiFi light.

Method 2: Mobile Devices with the Canon PRINT App

Get the Canon PRINT Inkjet/SELPHY app from Google Play or the App Store.
Launch the app and follow the on-screen directions to include your printer.
Open the app and follow the on-screen directions to include your printer. The app will let you link your printer to your WiFi
B:  Via USB
Should you like a wired configuration:
Use a USB wire to link the printer to your PC.
Power the printer.
Your computer might find the printer and install fundamental drivers automatically.
Otherwise, use the software installation instructions below.

Step 5: Install Drivers and Software

For the printer to work properly with your computer, you’ll need to install the correct drivers and software. How to Install:
Go to the official Canon website: www.usa.canon.com
Click on Support and enter your PIXMA printer model.
Get the most recent software package and drivers for your operating system—Windows or macOS.
Open the file you downloaded and follow the on-screen directions.
Choose the connection mode you used WiFi or USB during installation.
Finish the installation and, if required, restart your computer.
Once done, your printer setup is complete.

Step 6: Print a Test Page

It's time now to ensure everything functions.
Open a photo or document on your PC.
Select File > Print.
Select your Canon PIXMA printer from the list.
Press Print.
Your Canon PIXMA printer is ready to use if the page prints properly.

Troubleshooting Tips

If your Canon PIXMA printer doesn’t connect or work properly:
Make sure your WiFi network is working.
Restart your printer, router, and computer.
Check that you entered the correct WiFi password.
Reinstall the drivers from Canon’s website.
Try resetting the printer’s network settings and setting it up again.

Conclusion

If you know the right steps, then you can easily set up the Canon PIXMA printer. Follow the above-given steps; here we provide all processes from unpacking the printer to connecting your device to the printer.