Linksys RE6300 Reset Process: Step By Step

What is Linksys RE6300?

The Linksys RE6300 is a dual-band Wi-Fi range extender designed to enhance your existing wireless network by eliminating dead zones and boosting coverage throughout your home. It supports Wi-Fi speeds up to AC750 (N300 + AC433 Mbps) and is compatible with all Wi-Fi routers, including those provided by service providers.​

Whenever you encounter issue related to their connectivity or performance, it is always advisable to reset the device. This process of Linksys RE6300 reset basically erases the customised settings and other stored data. You will get an opportunity to reconfigure the device all over again. All sorts of technical glitches get fixed after this.

In this illustration you will be able to explore different situations where performing a reset seems essential and how you can process the reset simply. While or after the Linksys Extender Setup, there could be variant scenarios when you need Linksys RE300 reset, mentioned as below:

• Forgotten Password
• Performance Errors
• Frequent Disconnect
• Configuration Troubles
• Firmware Update Issues

Now let’s move forward with resetting Linksys RE6300, basically it can be conducted by two methods, first is via Reset Button another one is Using Web Interface.

Linksys RE6300 Reset via Reset Button

Locate the reset button on your Linksys RE6300; you will be able to locate it either at the side panel, bottom or back of the device.

• Once you find it, then press and hold it for couple of seconds.
• When the power LED indicators start blinking confirms the on-going process.
• As the reset process is over, you can reconnect all the devices to the extender’s network.
• Now, open a web browser on your device which is already connected with the extender.
• Enter the default IP Address, this will navigate you towards the Linksys RE6300 setup page and then follow the prompts to reconfigure the extender.
• This resetting process removes the glitches in the network and it will be protected from security hacks.

RE6300 Reset Setting via Web Interface

You can perform this process by opening an updated web browser on your device either computer or laptop which should be connected with the extender network, follow the steps as below:

• Enter https://extender.linksys.com in the search icon of the web browser.
• You can Login to your Linksys account by typing admin credentials.
• Follow Settings> Administration> Factory default Settings
• When the Linksys RE6300 Reset is complete, device will erase all the customised settings.

As you are now familiar with two methods of Linksys RE6300 setup, so next important step is to set up the device with your existing network. You can perform so quiet easily briefed as below:

Make sure that the Extender is plugged into a perfectly working electrical socket and connected with the home network.

Browse Linksys setup page and login by entering your admin credentials.

You will be then prompted forward to complete the setup process.

Conclusion

Linksys RE6300 Reset is an easy procedure, it is vital to understand the requirement to perform the same. This process of resetting plays a vital role in fixing technical glitches and in turn enhances the extender performance. If you need further assistance, you can speak with the support team as per your convenience.