How to Manage Wavlink AC1200 Range Extender?

Wavlink extenders are used by people worldwide to extend their existing network coverage. A wavlink extender device connects to your router device and amplifies its signals further. Managing a wavlink AC1200 range extender device is very easy. By accessing the wavlink extender login page you can manage the AC1200 network. Don’t know how to access the page? New to wavlink extender web interface? No issues, this guide will allow you to have access to the login page. Also we mentioned how you can manage your network and optimize the device performance to get the best out of it.

Wavlink AC1200 Range Extender

Wavlink AC1200 range extender device is perfect for your home. You can extend the network by using the device and eliminate dead zones. Network trouble might be disturbing you. If yes then this add on to your existing network will enhance your connectivity experience. Wavlink AC1200 range extender device can easily be set up using a web interface. Also you can manage its network by accessing the wavlink extender login page. In addition to this you can also perform wavlink AC1200 setup by accessing the login page. Steps to access the login page and manage the device network as mentioned in the further segment.

Access Wavlink Extender Login Page

You can easily access wavlink extender login page by follow few steps as mentioned underneath:

• Firstly you need a wavlink ac1200 range extender with its power adapter. Power up the device and initiate the access.
• Secondly, a computer/ laptop device connected to the wavlink extender’s network.
• Now you should launch google chrome or other browser you have to access wifi.wavlink.com portal.
• Once the portal appears use the admin account login credentials to access it.
• If you are a new user then you can access the page by using default login credentials.

Wavlink AC1200 Setup Process

Wavlink AC1200 extender can easily be set up by accessing the admin panel of the device. Step by step instruction to configure the device are as under:

• Firstly place the wavlink AC1200 device next to the host router and then access the admin panel by following the above specified steps.
• After accessing the admin panel you can initiate setup by selecting the language.
• Next, follow the screen and enter the SSID & password of the host networking device.
• Hit on connect option and then make changes in the default SSID & password of your wavlink AC1200 network.
• Thereafter check for the firmware update, if you are using the latest version then finish the setup otherwise update the same.
• Also don’t forget to make changes in the admin security password to keep your network safe.
• Afterwards you have to relocate the device and also test the network.

Manage Wavlink AC1200 Setup

You can easily manage your wavlink AC1200 setup by accessing the wavlink extender login page. Access to admin panel will allow you to perform following changes to your device network:

• Update device firmware
• Change admin password
• Change wifi network SSID & password
• Troubleshoot issues
• Setup a new network etc.

Optimize Wavlink AC1200 Network

Device network optimization is possible by accessing its web interface. Web interface allows you to configure various settings including security settings, firmware update and much more. Check out the steps you can follow and optimize your range extender network performance.

Best Placement

Placement of a wavlink extender matters a lot to perform the device better. Without adequate placement the device will not be able to amplify the signals perfectly. Also you will not get the signal broadcast where required. So while placing your device after configuration you have to keep certain things in mind as specified:

• Look for a place which is within the range of host router coverage.
• Should be closer to the wifi dead zone area or no signal zone area so it can rebroadcast signals and you will no longer face trouble.
• Don’t put it closer to heavy metal objects or radio frequency devices like cordless phones, microwave ets.
• Try not to put in the corners as wall’s may interrupt signal strength.

Regular Firmware Update

Firmware update when release is mandatory for the smooth performance of the device. You should check for the firmware update after a regular interval. Firmware updates will fix bugs in the network. Also install the new features so, keeping the firmware up to date is mandatory. To update your device firmware you have to follow the mentioned steps:

• Access the wavlink extender login page by following the above specified steps.
• Go to the settings and look for the firmware update option.
• Once you find it, run a scan to check whether a new update is available or not.
• If there is a latest version available then follow the screen to get it installed.
• Once your device firmware is updated, you must reboot your device before use.

Keep An Eye On Connected Devices

To get the best out of the device, you have to keep an eye on the devices connected to the network. It will not only keep you safe but also you can restrict the number of connected devices. Hence your device performance gets better.