Komatsu D65EX-15, D65PX-15, D65WX-15 Dozer Service Manual
-
- January 09th, 2026
- 988 views
Want your brand here? Start with a 7-day placement — no long-term commitment.
MACHINE MODEL SERIAL NUMBER
D65EX-15 67001 and up
D65PX-15 67001 and up
D65WX-15 67001 and up
Komatsu D65 PX-15 Dozer Bulldozer Service Repair Manual
Table of Contents
-
00 Index and foreword
Foreword and general information
01 Specification
Specification and technical data
10 Structure, function and maintenance standard
Engine and cooling system
Power train
Undercarriage and frame
Hydraulic system
Work equipment
Cab and its attachments
Electrical system
20 Standard value table
30 Testing and adjusting
40 Troubleshooting
80. Appendix
90 Diagrams and drawings
Composition of shop manual
• This shop manual contains the necessary technical information for services performed in a workshop. For ease of understanding, the manual is divided into the following sections.
00. Index and foreword
01. Specification
• This section explains the specifications of the machine.
10. Structure and function
• This section explains the structure and function of each component. It serves not only to give an understanding for the structure of each component, but also serves as reference material for troubleshooting.
20. Standard value table
• This section explains the standard values for new machine and judgement criteria for testing, adjusting, and troubleshooting. This standard value table is used to check the standard values in testing and adjusting and to judge parts in troubleshooting.
30. Testing and adjusting
This section explains measuring tools and measuring methods for testing and adjusting, as well as the adjusting method of each part. The standard values and judgment criteria for “Testing and adjusting” are explained in “Standard value table”.
40. Troubleshooting
• This section explains how to find out failed parts and how to repair them. The troubleshooting is divided by failure modes. The “S mode” of the troubleshooting related to the engine may be also explained in the Chassis volume and Engine volume. In this case, see the Chassis volume.
50. Disassembly and assembly
• This section explains the special tools and procedures for removing, installing, disassembling, and assembling each component, as well as precautions for them. In addition, tightening torque, and quantity and weight of coating material, oil, grease, and coolant necessary for the work are also explained.
60. Maintenance standard
• This section gives maintenance standard values of each component. The maintenance standard subsection explains the criteria and remedies for disassembly and service.
80. Appendix
• The section contains the equipment which can not be class, field in the other sections.
This section explains the structure, function, testing, adjusting, and troubleshooting for the equipment.
90 Diagrams and drawings
• This section gives hydraulic circuit diagrams and electrical circuit diagrams.
Classification and procedures of troubleshooting
Troubleshooting procedures when a failure code has been recorded:
When no action code is displayed on the monitor panel, display a failure code in the failure code display mode (electrical system, mechanical system) on the monitor display (EMMS).
When a failure code has been recorded, carry out the troubleshooting of the relevant [failure code] in accordance with the displayed failure code.
– Since a failure code flashes when a failure is detected, the failure has not always been corrected even if it lights when the starting switch is set to ON. (For some codes, failures can be detected by only turning the starting switch ON.)
– When a failure code has been recorded, be sure to perform the duplication operation corresponding to the failure code and confirm if the failure has still remained or has been already corrected.
(For the duplication method, refer to the troubleshooting relevant to the failure code.) 3. Troubleshooting procedures when no action code is displayed and a failure code has not been recorded:
When a failure code has not been recorded in the monitor panel (EMMS), a failure that the machine cannot diagnose by itself is supposed to have occurred in the electrical system or the hydraulic and mechanical system.
In this case, check again a symptom supposed to be a failure and select the relevant symptom out of the table of Symptom supposed to be failure and troubleshooting No. Then, carry out the troubleshooting in the [E-Mode], [H-Mode] or [S-Mode] related to the symptom.
